Your cart is empty!
Portable efficiency measurement system for HVAC and related work, with hot wire anemometer, static and differential pressure, temperature and humidity measurement with heat flow efficiency calculation. Velocity (hot wire) 0 to 50m/s, accuracy +/-3%. Temperature -10 to 60 degree C, accuracy +/-0.3. Wet bulb temperature 5 to 60 degree C. Relative humidity 0 to 95%RH, accuracy +/-3%. Dewpoint -15 to 49 degree C. Static/differential pressure -3,735 to 3,735Pa, accuracy +/-1%. Probe length 1m, tip diameter 7mm, base diameter 10mm. Includes data logging and printing. Battery operated. USB & Bluetooth download.
The Viavi OneExpert CATV 620 is an approved signal analysis meter for verifying and troubleshooting network performance on the NBN and Telst..
Cable and pipe avoidance and location tool with depth measurement. Simultaneous dual 33+131 kHz frequency will assist in the detection of sm..
Protection relay test set with six current sources (6 x 32A/430VA, 3 x 64A/860VA or 1 x 128A/1000VA), four voltage outputs (4 x 300V or 1 x ..
JDSU,MTS-2000 with JDSMTS-4136MA-FCOMP-SCA OTDR module. Maintain metro and PON-based FTTx networks. 1310, 1550 and 1625 nm wavelengths at..
Tags: TSI 9565A, static measurement, differential pressure measurement, HVAC equipment, air conditioner testing, air conditioner testing equipment